Need Swimming Pool Maintenance?
Serving Yoder and surrounding areas.
Let our local pool experts help! Call today for more info...Call Now! (855) 610-7133
GET A FREE QUOTE NOW - CALL (855) 610-7133
Adding an inground pool not only offers entertainment, exercise, and leisure to your backyard, but it increases the value of your home. In 2003, the National Association of Realtors reported that this addition adds around 8 percent to your home’s value. Typically, maintenance schedules in Yoder WY 82244 involve weekly and monthly responsibilities. Purchasing pool supplies and equipment from a specialty or home improvement store can help you sustain your maintenance schedule. Below are some instructions designed to help you take care of your new backyard treasure.
– Check your pH and chlorine levels at least twice a week. You should maintain a pH range of 7.4 to 7.6 and a chlorine level of 1.0 to 3.0 parts per million (ppm). Follow the directions according to your testing strips and add products to re-balance these levels, if necessary.
– Weekly, empty the skimmer baskets, skim leaves and debris with a cleaning net, and use a vacuum cleaner to clean debris from the bottom. Give special attention to areas near the steps, ladders, and other equipment.
– To eliminate waterline stains and keep your pool looking fresh, apply surface cleaner to the waterline on the walls.
– Shock the pool water once a week. This involves adding a large dose of chlorine to eliminate algae and other contaminants. Be sure to read the instructions on your pool supplies to determine how much you should add. Additionally, avoid swimming for at least 24 hours after shocking.
– During the summer months, run the filtration system as much as possible. The water is less likely to become polluted with dirt, bacteria, and body oils when it is continuously moving.
Off-Season Maintenance in Goshen County
– Prior to shutting down for the swimming season in Yoder, check for cracks, leaks, or any sign of damage that needs to be addressed. The harsh conditions of winter temperatures will only make this damage worse, so addressing the problems now will save you money in the future.
– Test the chemical levels and adjust as needed. Use the same procedures and pool supplies utilized during in-season maintenance.
– Remove ladders, diving boards, slides, ropes, and all other objects from the water and store safely.
– Drain water from the pump, filter, heater, and all tubing. Any remaining water is likely to freeze during the winter, causing damage to these accessories.
– Reduce the water level. If your walls are decorated with tiles, the level should remain below these tiles during the off-season.
– Using a safety cover, secure your pool, ensuring there are no obvious tears, rips, or damage to the cover. Every few weeks, inspect the cover and replace if necessary.
Pool Supplies Needed
– Chemical testing strips
– Vacuum cleaner
– Chemical shock
– Chemical balancing agents
Following these guidelines will promise that you have a clean and fun-filled summer!
In order to ensure a clean swimming pool with the proper chemical balance, every pool owner should have the following pool supplies at their disposal.
Installing a pump is crucial for any contained swimming area. Just like a fish tank, the water needs to be constantly circulated and filtered for harmful chemicals and human bacteria or by-products. Properly filtered and pumped water, with the addition of cleansing chemicals like chlorine, helps keep it clean and safe for swimming at all times.
A Skimmer and Filter System
A skimmer is perhaps the most basic and essential of pool supplies. Simply put, it’s a net at the end of a long pole designed to help you fish any unwanted debris, leaves, insects or junk out of the water. This tool is relatively inexpensive and is easily replaced if anything were to happen to it. Being able to catch items before they get sucked into the filter can help reduce your need to clean out the filter more regularly. Skimming just before you jump in can also make swimming far more enjoyable without the worry of running into any dead insects, small animals or large twigs.
Chemical Testing Materials
It’s very important to make sure the water is properly balanced chemically. The most common thing to test for is the pH level. Generally the pH should fall between 7.2 and 7.8. Some pH level testing kits can also test for other chemicals and determine alkalinity and chlorine levels. Keep in mind that extreme temperatures can also influence the pH, requiring you to check the levels more regularly. If you find your chemicals are severely off their mark, you may need to shock the pool, which a process that requires a large amount of chemicals to disinfect. You’ll need to call in a professional for this job, and they will advise you not to swim for a certain period of time.
In addition to your other pool supplies, it is advisable to have a tile cleaning agent. The tiles in a pool come in constant contact with the water. This can sometimes cause buildup, which looks unpleasant and may even affect the pool’s chemical levels. Keep the tiles free of calcium and stains with any type of tile cleaning agent. If your tiles have become especially dirty, you might consider draining the water before performing a massive cleaning endeavor. Otherwise, using a small amount of cleaner on a rag can go a long way with only slightly tainted tiles.
It’s vital to clean filters and check pH levels to make sure your pool stays clean and safe throughout the year. In addition to the above pool repairs, you will also need to seek several maintenance services such as pool cleaning, pH testing, and chlorine balancing.
To keep your pool in top condition and looking beautiful for a long time, swimming pool maintenance companies in Yoder Wyoming offer routine care and upkeep services. Pool specialists will come in on a regular schedule (for example, twice a week) to clean the pool and check on the operating equipment and systems. These experts will also be able to help you find the best solution for keeping the water in your pool clean. Skimmers come with the pool to enable owners to clean the water regularly or they can use chlorine, but a better alternative would be to have a Salt Chlorine Generator installed. This mechanism converts a small amount of salt into chlorine (without using chemicals) to keep the water clean and healthy and give users access to water that feels fresh and silky smooth on the skin.
For more details visit...Pool Company
- Swimming Pool Services in Basin WY
- Swimming Pool Services in Leiter WY
- Swimming Pool Services in Meeteetse WY
- Swimming Pool Services in Lander WY
- Swimming Pool Services in Big Piney WY
- Swimming Pool Services in Bosler WY
- Swimming Pool Services in Kinnear WY
- Swimming Pool Services in Bairoil WY
- Swimming Pool Services in Lusk WY
- Swimming Pool Services in Granger WY